EXPLORER-300PDS OTA

305MM (12") F/4.9 PARABOLIC DUAL-SPEED NEWTONIAN REFLECTOR

EXPLORER-300PDS OTA
  Zoom
SRP: £729.00

Product Code:  10222
Brand:  Sky-Watcher



Sky-Watcher



  • Sir Patrick Moore CBE FRS"I have used a great number of telescopes; some are good, some mediocre and some bad. To me the Sky-Watcher range of instruments are very good indeed, and suited to amateurs of all kinds – and they are not priced out of the market! Excellent value.
    Use them and enjoy them."
    Sir Patrick Moore CBE FRS (1923 to 2012)
  • Ade Ashford Says..."Having tested and reviewed a wide range of astronomical telescopes over the last couple of decades, for me there's one manufacturer that's risen above the rest in terms of delivering a coherent range of uncompromising, well-conceived designs, embodying consistently good optics and sensibly engineered mounts at very competitive prices — that's Sky-Watcher!!"Ade Ashford BScAde Ashford has tested and reviewed astronomical equipment in a professional capacity for several publications, including Sky & Telescope, Astronomy Now & BBC Sky At Night Magazine.

“Compared to our own 250mm f/5 Newtonian reflector, the extra light gathered by the Explorer-300P was obvious. We got impressive views of a wide range of celestial objects. Galaxies such as M65 & M66 in Leo were wonderful, with strong hints of subtle detail along their spiral discs. The nearby galaxy NGC 3628 also stood out well. Nebulae shone against the background sky. M1, the Crab Nebula, showed varying degrees of mottling and scalloped edges – very satisfying indeed. The Orion Nebula, M42-43, was awash with nebulosity and we found we could easily get lost amongst the detail.. At its centre, the Trapezium group of stars sparkled and, at the highest magnifications , we spotted several of its fainter mag. +10 stars, even though the atmosphere wasn’t as steady as we would have liked for such high-magnification views. Detail Explosion: Late into the night we selected the globular cluster M13 from the hand-controller. As it swung into the field of view it was breathtaking, with swarms of stars looking like bees around a honey pot. The view was so good that we noticed a dark feature, commonly known as the Propeller, superimposed on one side of the cluster. It was easily the best view of the cluster we’ve ever had….For crystal clear views of deep space, this is hard to beat!”
BBC Sky At Night Magazine (Review of Explorer-300P single-speed version with same mirror set)

The new Sky-Watcher EXPLORER-300PDS Newtonian Reflector incorporates the same superb mirror-set as the Explorer-300P but with two significant advantages. A Dual-Speed 10:1 ratio focuser is now included for excellent focusing precision. Also the tube length has been slightly shortened to optimise performance for prime-focus photography.

Even better performance for astro-photography and visual use can be achieved when used in combination with Sky-Watcher’s Newtonian coma corrector (Prod.Code 20233)

Standard Specification:

  • Magnifications (with eyepieces supplied) x53.5
  • Highest Practical Power (Potential) x610
  • Diameter of Primary Mirror 305mm
  • Telescope Focal Length 1500mm (f/4.9)
  • Eyepieces Supplied 28mm LET (2"/50.8mm)
  • 9x50 Finderscope
  • Parabolic Primary Mirror
  • 2" (50.8mm) Dual-Speed 10:1 Crayford Focuser
  • 0.5mm Ultra-Thin Secondary Mirror Supports
  • Supplied with Tube Rings and Losmandy type dovetail bar
  • 44% more Light-Gathering than 250mm

PARABOLIC PRIMARY MIRRORS
Features High Quality Parabolic Primary Mirrors to eliminate spherical aberrations inherent in 'fast' focal lengh reflectors with spherical primary mirrors. The mirrors are parabolized to bring all the light rays to the same focal point to give sharp, constrasty images, which are full of detail.
SKY-WATCHER DELUXE MIRROR COATINGS
Most reflectors today usually have a coat of aluminium as the mirror surface and then an overcoat of silicon monoxide or silicon dioxide to protect it. Silicon dioxide produces a much more durable coat than silicon monoxide but requires specialized equipment to apply it and is therefore more expensive. Protection is needed, because in most reflectors, the mirror is open to the elements and deterioration of the reflective layer reduces the resolution of the telescope.ALL Sky-Watcher reflectors are Multi-Coated with Silicon Dioxide as standard for Optimum Durability and Long Term Performance.
  • Sky-Watcher Logo
  • Helios Logo
  • Acuter Logo
  • First Logo
  • Zenith Logo
  • Barr & Stroud Logo
  • Fotomate Logo